Vinyl Cutting Blades
All Antares cutting blades are manufactured using micrograin carbide for performance and durability. Blades are packaged with protective caps. Custom packaging and labeling are available. Blades shown are our standard products. We also have the capability to produce blades for specialty applications. Contact us for information.
Blades for plotters including:
Blades for Anagraph Vinyl Plotters
Part Number: AVB-ANA045
45°
For cutting general signage vinyl 2 - 12 mil. thick with 0.25 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-ANA060
60°
For cutting material 12 mil. and thicker with 0.25 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Blades for Gerber Vinyl Plotters
Part Number: AVB-GER030
30°
For cutting 2 - 4 mil. thick material.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-GER045
45°
For cutting 4 - 12 mil. thick material.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-GERGSX
GSX Blade
For cutting 2 - 4 mil. thick material.
Content on this page requires a newer version of Adobe Flash Player.
Blades for Graphtec Vinyl Plotters
Part Number: AVB-GRA045
45°
For cutting general signage vinyl 2 - 12 mil. thick.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-GRA060
60°
For cutting material 12 mil. and thicker.
Content on this page requires a newer version of Adobe Flash Player.
Blades for Great Computer Corporation (GCC) Vinyl Plotters
Part Number:
For cutting general signage vinyl. Standard blade with largest angle.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-GCC002
For cutting thin sandblast masks and stencils with friction feed or sprocket feed machines.
Content on this page requires a newer version of Adobe Flash Player.
Part Number:
For cutting small text and fine detail. Sharp blade with smallest offset (.175 mm).
Content on this page requires a newer version of Adobe Flash Player.
Part Number:
For cutting thick, fluorescent and reflective vinyl. Also, for cutting detailed work on standard vinyl.
Content on this page requires a newer version of Adobe Flash Player.
Part Number:
For cutting reflective vinyl, cardboard, sandblast, and stencil. Sharp edge with 0.50 mm offset.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-GCC006
For cutting cardboard, sandblast, and stencil. Sharp edge with 0.75 mm offset.
Content on this page requires a newer version of Adobe Flash Player.
Part Number:
For cutting cardboard, sandblast, and stencil. Sharp edge with 1.00 mm offset.
Content on this page requires a newer version of Adobe Flash Player.
Blades for Ioline Vinyl Plotters
Part Number: AVB-IOL045
45°
For cutting general signage vinyl 2 - 12 mil thick.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-IOL060
60°
For cutting material 12 mil. and thicker.
Content on this page requires a newer version of Adobe Flash Player.
Blades for Mimaki Vinyl Plotters
Part Number: AVB-MIM001
37°
For cutting 2 - 4 mil. thick material with 0.25 - 0.30 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-MIM003
40°
For cutting small letters and detail in 2 - 4 mil. thick material with .125 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-MIM005
56°
For cutting small letters and detail in 2 - 4 mil. thick material with 0.75 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Blades for Mutoh Vinyl Plotters
Part Number: ZME-10034A
30°
For cutting 2 - 4 mil. material thickness with 0.5 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: ZME-10034B
45°
For cutting small letters and detail in 4 - 12 mil. thick material with 0.5 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: ZME-10034C
60°
For cutting small letters and detail in material 12 mil. or thicker with 0.5 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Blades for Summa Vinyl Plotters
Part Number: AVB-SUM001
36°
For cutting general signage vinyl 2 - 12 mil. thick with 0.45 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.
Part Number: AVB-SUM003
60°
For cutting material 12 mil. and thicker with 0.45 mm offset setting.
Content on this page requires a newer version of Adobe Flash Player.