 |
 |
 One Flute RouterMills® |
| Two Flute RouterMills® |
| Three Flute RouterMills® |
| Ballnose RouterMills® |
| SpiralFlute® Cutters |
|
Metric Sizes - One Flute
|
Standard Sizes - One Flute
|
|||||||||
|
Shank
Diameter
|
Tool Length
|
Cut Width
|
Cutting Length
|
Price
|
Shank Diameter
|
Tool Length
|
Cut Width
|
Cutting Length
|
Price
|
|
| 3 mm | 50 mm | 1.5 mm | 6 mm | 13.15 | 1/8" | 2" | 1/16"* | 1/4" | 13.15 | |
| 3 mm | 50 mm | 2.0 mm | 8 mm | 11.65 | 1/8" | 2" | 3/32" | 5/16" | 11.65 | |
| 3 mm | 50 mm | 3.0 mm | 10 mm | 10.90 | 1/8" | 2" | 1/8" | 3/8" | 10.90 | |
| 3 mm | 50 mm | 3.0 mm | 15 mm | 11.40 | 1/8" | 2" | 1/8" | 5/8" | 11.40 | |
| 3 mm | 63 mm | 3.0 mm | 20 mm | 11.90 | 1/8" | 2-1/2" | 1/8" | 3/4" | 11.90 | |
| 4 mm | 50 mm | 2.0 mm | 6 mm | 13.70 | 3/16" | 2" | 3/16" | 1/2" | 12.20 | |
| 4 mm | 50 mm | 4.0 mm | 12 mm | 12.20 | 3/16" | 2-1/2" | 3/16" | 3/4" | 13.20 | |
| 4 mm | 63 mm | 4.0 mm | 20 mm | 13.20 | 3/16" | 3" | 3/16" | 1-1/8" | 14.70 | |
| 4 mm | 75 mm | 4.0 mm | 30 mm | 14.70 | 1/4" | 2" | 3/32" | 5/16" | 15.00 | |
| 5 mm | 50 mm | 5.0 mm | 16 mm | 12.20 | 1/4" | 2" | 1/8" | 3/8" | 15.00 | |
| 5 mm | 75 mm | 5.0 mm | 30 mm | 14.70 | 1/4" | 2-1/2" | 1/8" | 3/4" | 16.00 | |
| 6 mm | 50 mm | 2.0 mm | 8 mm | 15.00 | 1/4" | 2" | 3/16" | 9/16" | 14.25 | |
| 6 mm | 50 mm | 3.0 mm | 10 mm | 15.00 | 1/4" | 2-1/2" | 3/16" | 3/4" | 15.75 | |
| 6 mm | 63 mm | 3.0 mm | 20 mm | 20.75 | 1/4" | 2-1/2" | 1/4" | 3/4" | 13.50 | |
| 6 mm | 50 mm | 4.0 mm | 12 mm | 15.00 | 1/4" | 3" | 1/4" | 1-1/8" | 16.00 | |
| 6 mm | 63 mm | 4.0 mm | 20 mm | 17.50 | 1/4" | 3" | 1/4" | 1-1/2" | 17.00 | |
| 6 mm | 50 mm | 5.0 mm | 16 mm | 14.25 | ||||||
| 6 mm | 63 mm | 6.0 mm | 20 mm | 13.50 | ||||||
| 6 mm | 75 mm | 6.0 mm | 30 mm | 16.00 | ||||||
| 6 mm | 75 mm | 6.0 mm | 38 mm | 17.00 | ||||||
One Flute RouterMills®| (*) Please note that while RouterMills® are stronger than parallel engraving cutters, a tool sharpened to a 1/16" tip (.060" or 1.5mm) is inherently fragile. Slower feed rates and plunge rates must be used to avoid breakage and prolong tool life. |
| Antares RouterMills® have been designed to offer cleaner, faster cuts in a variety of materials at the high spindle speeds typically associated with engraving machines and routers. These tools are available with one, two, or three flutes depending on the material being cut and the size of the tool. These tools will produce a straight walled cut with a flat bottom and work very well for cutting out shapes. |
|
Metric Sizes - Two Flute
|
Standard Sizes - Two Flute
|
|||||||||
|
Shank
Diameter
|
Tool Length
|
Cut Width
|
Cutting Length
|
Price
|
Shank Diameter
|
Tool Length
|
Cut Width
|
Cutting Length
|
Price
|
|
| 3 mm | 50 mm | 2.0 mm | 6 mm | 11.65 | 1/8" | 2" | 1/16"* | 3/16" | 13.15 | |
| 3 mm | 50 mm | 3.0 mm | 9 mm | 10.90 | 1/8" | 2" | 3/32" | 9/32" | 11.65 | |
| 4 mm | 50 mm | 2.0 mm | 6 mm | 13.70 | 1/8" | 2" | 1/8" | 3/8" | 10.90 | |
| 4 mm | 50 mm | 4.0 mm | 12 mm | 12.20 | 3/16" | 2" | 3/16" | 9/16" | 12.20 | |
| 6 mm | 50 mm | 3.0 mm | 9 mm | 15.75 | 1/4" | 2" | 1/8" | 3/8" | 15.00 | |
| 6 mm | 50 mm | 4.0 mm | 12 mm | 15.00 | 1/4" | 2" | 3/16" | 9/16" | 14.25 | |
| 6 mm | 50 mm | 5.0 mm | 15 mm | 14.25 | 1/4" | 2-1/2" | 1/4" | 3/4" | 14.50 | |
| 6 mm | 50 mm | 6.0 mm | 18 mm | 14.50 | ||||||
Two Flute RouterMills®| (*) Please note that while RouterMills® are stronger than parallel engraving cutters, a tool sharpened to a 1/16" tip (.060" or 1.5mm) is inherently fragile. Slower feed rates and plunge rates must be used to avoid breakage and prolong tool life. |
| Antares RouterMills® have been designed to offer cleaner, faster cuts in a variety of materials at the high spindle speeds typically associated with engraving machines and routers. These tools are available with one, two, or three flutes depending on the material being cut and the size of the tool. These tools will produce a straight walled cut with a flat bottom and work very well for cutting out shapes. |
|
Metric Sizes - Three Flute
|
Standard Sizes - Three Flute
|
|||||||||
|
Shank
Diameter
|
Tool Length
|
Cut Width
|
Cutting Length
|
Price
|
Shank Diameter
|
Tool Length
|
Cut Width
|
Cutting Length
|
Price
|
|
| 6 mm | 63 mm | 6.0 mm | 6 mm | 14.50 | 1/4" | 2-1/2" | 1/4" | 3/4" | 14.50 | |
Three Flute RouterMills®| (*) Please note that while RouterMills® are stronger than parallel engraving cutters, a tool sharpened to a 1/16" tip (.060" or 1.5mm) is inherently fragile. Slower feed rates and plunge rates must be used to avoid breakage and prolong tool life. |
| Antares RouterMills® have been designed to offer cleaner, faster cuts in a variety of materials at the high spindle speeds typically associated with engraving machines and routers. These tools are available with one, two, or three flutes depending on the material being cut and the size of the tool. These tools will produce a straight walled cut with a flat bottom and work very well for cutting out shapes. |
 Ballnose RouterMills®RouterMills® are also available as ballnose tools. The radiused tip is ideal for creating smooth finishes on 3-D applications. Ballnose RouterMills® are available as 2-flute tools in the tip sizes shown below. Custom tip sizes are available. Ballnose RouterMills® are are designed for cutting butterboard, acrylic, wood, aluminum, brass, and other materials for common 3-D applications such as modeling and mould making. |
|
Metric Sizes
|
|||||||
|
Shank
Diameter
|
Part No.
|
# of Flutes
|
Tip Size / Price
|
||||
|
2mm
|
3mm
|
4mm
|
5mm
|
6mm
|
|||
|
3mm x 50mm
|
ARMC-118-2FP-BN
|
2
|
12.65
|
11.90
|
n/a
|
n/a
|
n/a
|
|
4mm x 50mm
|
ARMC-156-2FP-BN
|
2
|
14.70
|
s/o
|
13.20
|
n/a
|
n/a
|
|
6mm x 50mm
|
ARMC-236-2FP-BN
|
2
|
s/o
|
16.75
|
s/o
|
s/o
|
14.50
|
|
Standard Sizes
|
|||||||
|
Shank Diameter
|
Part No.
|
# of Flutes
|
Tip Size / Price
|
||||
|
.060"*
|
.090"
|
.125"
|
.187"
|
.250"
|
|||
|
1/8" x 2"
|
ARMC-125-2FP-BN
|
2
|
12.65
|
11.90
|
n/a
|
n/a
|
n/a
|
|
3/16" x 2"
|
ARMC-187-2FP-BN
|
2
|
14.70
|
s/o
|
13.20
|
n/a
|
n/a
|
|
1/4" x 2"
|
ARMC-250-2FP-BN
|
2
|
s/o
|
16.75
|
s/o
|
s/o
|
14.50
|
SpiralFlute® Cutters
Antares SpiralFlute® Cutters are a hybrid between an engraving cutter and a RouterMill®. They provide the same cutting characteristics as a standard engraving cutter while benefitting from the strength of a fluted tool. This extra strength produces a tool that performs exceptionally well in harder materials such as stainless steel. SpiralFlute® Cutters are available in tip sizes ranging from .005" to .060". These tools produce the best results when used with relatively slow feed rates and cutting fluid. SpiralFlute® Cutters also work extremely well ifor engraving brass. SpiralFlute® Cutters are manufactured from a special grade of carbide that has a metallurgical structure even finer than our micrograin carbide. This carbide provides the best edge retention and sharpest cutting edges, while greatly reducing chipping. |
|
Metric Sizes
|
||
|
Size
|
Part No.
|
Price
|
|
3mm x 50mm
|
SFC-118
|
9.25
|
|
6mm x 63mm
|
SFC-256
|
20.55
|
|
Standard Sizes
|
||
|
Size
|
Part No.
|
Price
|
|
1/8" x 2"
|
SFC-125
|
9.25
|
|
1/4" x 2-1/2"
|
SFC-250
|
17.40
|